Skip to content

flyPad Settings

Overview

There are various aspects of the aircraft and its simulation which can and sometimes must be configured.

Find a descriptions of all available setting categories and its settings below.

Aircraft Options / Pin Programs

Settings for A32NX aircraft configuration.

Usage

  • Thrust Reduction Height (ft):
    • Default for the MCDU setting for thrust reduction height (above ground).
  • Acceleration Height (ft):
    • Default for the MCDU setting for acceleration height (above ground).
  • Engine-Out Acceleration Height (ft):
    • Default for the MCDU setting for engine-out acceleration height (above ground).
  • ISIS Baro Unit
    • User can set which baro setting he wants to have in the ISIS backup instrument.
  • ISIS Metric Altitude
    • User can set which units setting he wants to have in the ISIS backup instrument.
  • PAX Signs:
    • Configures if the aircraft should use "No Smoking" or "No Portable Devices" in its ECAM message when the no smoking selector switch on the overhead panel is selected on.
  • RMP VHF Spacing

    • Changes the spacing for selectable frequencies in the RMPs from 8.33kHz to 25kHz and vice versa.
    Channel Spacing (click to expand)

    Aircraft radio systems transmit on a Very High Frequency (VHF) band between 117.975 and 137 MHz. The number of available VHF assignments has increased over the years by splitting the radio spectrum into narrower bandwidths from 50-kHz to 25-kHz channels. The bandwidth can support 760 channels, if channels are spaced by 25 kHz. In 1994, it was decided to introduce a further channel split from 25 to 8.33 kHz. 8.33-kHz spacing was introduced above Flight Level (FL) 240 in International Civil Aviation Organization (ICAO) European (EUR) regions in October 1999 and above FL 195 from March 15, 2007. Currently, 8.33-kHz channels have been implemented in the airspace of all 20 ICAO EUR region states. So far, Europe is the only region that’s moved to 8.33-kHz channel spacing.

    Source: universalweather.com

    See also: 8.33kHz Voice Channel Spacing communications

  • FMGC Lat/Lon Waypoint Format

    • Configures the name format for the Stored Waypoints to be used when NAT routes are imported via SimBrief.
  • Weight Unit:
    • The weight unit of the aircraft used for aircraft weight, fuel and simBrief imports.
  • Satcom:
    • Enables showing the Honeywell JetWave Satcom antenna on the fuselage.

Sim Options

Settings for simulation aspects of the A32NX aircraft.

Usage

  • Default Baro:

    • User can set which baro setting is wanted as a default: inHg, hPA or Auto (depends on the airport where the aircraft spawned).
  • Sync MSFS Flight Plan:

    • User can set if and how the flight plan synchronization between the simulator and the aircraft should work.
    • The options are:

      • None:
        • The simulator's flight plan will not be loaded and changes to the aircraft's flight plan will not be saved back to the sim's flight plan.
      • Load Only:
        • The simulator's flight plan set in the World Map will be loaded once when starting the flight. Any subsequent changes to the flight plan in the aircraft will not be synchronized back to the simulator.
      • Save:
        • The simulator's flight plan set in the World Map will be loaded once when starting the flight. Any subsequent changes to the flight plan in the aircraft will be synchronized back to the simulator if possible. See the warning below for more information.

      There is No synchronization from the sim's flight plan to the aircraft after initial load.

      Synchronization Issues Expected

      The aircraft's custom Flight Management System provides better accuracy and features over the default flight plan manager in Microsoft Flight simulator which results in issues syncing the flight plan from the MCDU back into the simulator. Do not expect it to work properly in all cases.

  • Enable SimBridge Connection

    • Auto:
      • The aircraft attempts to connect to the SimBridge for 5min after pressing "Ready to Fly" (Active is shown).
      • If this setting is selected the aircraft will try to connect to the SimBridge for 5min after every start of a new flight.
      • After 5min of unsuccessful connection attempts the aircraft will stop any further attempts and Inactive will be shown.
      • If Inactive is shown, but you want to connect to the SimBridge just click on Off, wait a few seconds, and then click on Auto again.
    • Off:
      • The aircraft will not make any attempts to connect to the SimBridge.
    • Also see our SimBridge Guide on which features require the SimBridge and how to set up and configure it.
  • External SimBridge Port

    • User can change the port for the SimBridge in case the default port is already occupied on the user's system.
    • Default is: 8380
  • Dynamic Registration Decal:

    • The dynamic registration number decal shown on the external livery can be disabled to improve appearance when using liveries with a static registration number.
  • Use calculated ILS signals
    • Enable this setting to use a calculated ILS signal instead of the signal provided by Microsoft Flight Simulator.
    • This avoids unwanted and unrealistic loss of the ILS signal in Microsoft Flight Simulator which often happens when the aircraft gets below the antenna position.
    • In some rare cases this can cause a faulty G/S signal. In this case this setting can be disabled with immediate effect.
  • Wheel Chocks
  • Safety Cones
  • Throttle Detents

Realism

Settings for realism aspects of the A32NX aircraft.

Usage

  • ADIRS Align Time:
    • User can set this to either a realistic time (~8min), a faster time (~2min) or instant.
  • DMC Self Test Time:
    • User can set the time for the Display Management Computer's self test (Real ~15sec, Fast ~5sec, Instant).
  • Boarding Time:
    • User can set the simulated boarding time to either a realistic time (~15min), a faster time (~3-4min), or instant.
      • Based on full load - 174 passengers and full cargo.
  • Autofill Checklists
    • Supports the user with checking items from the checklists by watching the corresponding switches, knobs and buttons and setting the checklist item to complete when the setup is correct.
  • Home Cockpit Mode
    • Removes backlight bleed from PFD, ND, and ECAMs
    • Removes reflection from the ISIS
  • Separate Tiller from Rudder Inputs
    • User can choose to use how the nose wheel shall be controlled:
      • Legacy mode (Disabled): Rudder controls also move the nose wheel. No separation.
      • Realistic mode (Enabled): Nose Wheel steering with tiller handwheel is separate from the rudder.
  • MCDU Keyboard Input (unrealistic)
  • MCDU Focus Timeout (s)
    • The timeout feature will automatically deactivate the focus of the MCDU screen after the given amount of seconds.
    • Valid range is 5 - 120 seconds.
    • Setting is only available if MCDU Keyboard Input is enabled.
  • Sync EFIS controls between Captain and FO (unrealistic)
    • When enabled, the EFIS controls will be synchronized between the Captain and FO.
    • This includes the Flight Director (FD), Landing System (LS) and Baro (STD, QNH and inHg/hPa) controls.
    • Note: Baro is currently not separated between the Captain and FO and is always synchronized independent of this setting.
  • Show Pilot Avatar
    • When enabled, the pilot avatar will be visible in the cockpit.
    • The avatar style can be chosen in the MSFS settings General Options -> Misc.
  • Show First Officer Avatar

    • When enabled, the first officer avatar will be visible in the cockpit.
    • The avatar style can be chosen in the MSFS settings General Options -> Misc.

3rd Party Options

Settings for integrations with various 3rd party applications

This feature is only available in the Development Version and Experimental Version

GSX Integration

These options are seperate to provide you with the flexiblity to choose what to sync with GSX and what not to sync.

Enabling any of these options will retroactively disable the chocks and cones. You cannot re-enable as long as any of these options are enabled. This is due to how GSX detects the parking brake.

Profile provided

The aircraft comes with a GSX profile, please read here for more information.

  • GSX Payload Sync:
    • Enables to option to synchronise GSX and the aircraft's own payload management system.
  • GSX Fuel Sync:
    • Enables the option to synchronise GSX and the aircraft's own fuel management system.

ATSU/AOC

Settings for integrations with various data and information sources.

Usage

  • ATIS/ATC Source:
    • Choose which Online ATC service should be used for ATIS and ATC.
  • METAR Source:
    • Choose which weather data provider should be used (Aircraft only - does not change sim weather).
    • MeteoBlue is the weather service the sim uses as well.
  • TAF Source:
    • Choose which Terminal Area Forecast (TAF) service should be used.
  • Automatically Import SimBrief Data
    • Imports latest SimBrief flight automatically when starting the flyPad.
  • Error Reporting
    • Enables error reports to be sent to Sentry.io to allow the FlyByWire team to easier find and fix issues with the aircraft.
  • TELEX:

    • Enables free text and live map (FlyByWire Live Map).

      Warning

      If enabled, aircraft position data is published for the duration of the flight. Messages are public and not moderated.

      USE AT YOUR OWN RISK

      Free Text - Feature Guide

    • If enabled a message will be displayed to confirm sharing of the free text and position data to the public.

      flypad-settings-atsu-aoc-telex-warning

  • Simbrief Username/Pilot ID

  • Hoppie User ID:
    • Unique logon code that is used to identify the user for the Hoppie ACARS communication.
    • See Create a logon code in our documentation for Hoppie ACARS.

SimBrief Integration

Before you can use the A32NX simBrief Integration you need to provide your simBrief account details.

Found in Settings -> ATSU/AOC

If you have arrived at this section from the SimBrief Integration page please make note this setting is found on the EFB.

  • SimBrief Pilot ID:

    • Enter your simBrief Pilot ID.

    simBrief Account field

    • If you entered a wrong Pilot ID a red error message will be displayed.

    simBrief Account Field Error

To get your simBrief Pilot ID you can go to your simBrief Account settings and open "SimBrief Data".

simBrief Account Data

Audio

Settings for various audio sources and sounds.

  • Volume Sliders:
    • Dynamically adjust various audio elements while in the virtual cockpit.
  • PTU Audible in Cockpit (unrealistic):
    • The aircraft's PTU sound (barking sound) is not audible in the cockpit in the real aircraft.
    • To make it audible in the cockpit set this option to on.
  • Passenger Ambience:
    • Select if passenger audio sounds should be played.
  • Announcements:
    • Select if crew announcements should be played.
  • Boarding Music:
    • Select if music should be played while boarding.

For detailed information on these settings please visit:

Audio Configuration Page

flyPad Settings

Settings for the flyPad itself.

Usage

  • Language
    • Selects the flyPad language
  • Onscreen Keyboard Layout
    • Selects the keyboard layout of the flyPad's on screen keyboard
  • Automatically Show Onscreen Keyboard:
    • A virtual keyboard will appear whenever an input field is entered by the user.
  • Auto Brightness:
    • Sets the brightness of the flyPad automatically based on the time of day.
  • Brightness:
    • Manually set brightness of the flyPad.
    • This setting is only available if Auto Brightness is off.
  • Battery Life Simulated
    • If enabled the flyPad battery will discharge if aircraft is not powered.
    • The battery will last about 9h.
    • If the sim's time is changed forward 9+h after loading the flight the battery will be empty.
    • Battery will be charged if the aircraft is powered (Ext. Power, APU, one engine)
  • Show Status Bar Flight Progress:
    • Select if the progress of the flight shall be shown in the top status of the flyPad screen.
  • Show Colored Metar:
    • Enable or disable the colored raw METAR on the flyPad Dashboard.
  • Time Displayed:
    • Select which time should be displayed in the top bar of the flyPad screens.
  • Local Time Format:
    • Select if local time should be shown in 12 or 24 hours format.
    • This setting is only available if Time Displayed is showing local time.
  • Theme:
    • Select which coloring theme the flyPad should have.

About

The About page provides the build information which is sometimes requested when seeking support on the FlyByWire Discord.


Last update: February 19, 2023